
Teufelberger Platinum Protect 10.5mm Climbing Rope
Teufelberger Platinum Protect features the Platinum technology with a mechanical connection between the core and the cover which enhances your safety because it reduces sheath slippage. The permanent mechanical connection between the cores and the cover increases safety, but also prolongs the rope's life.
This rope with a polyester cover offers good breaking loads as well as advantageous chemical and physical properties such as UV resistance, seawater resistance, and good abrasion strength in both dry and wet conditions. These characteristics and the good handling of this rope make your work at height easier. PLATINUM® Protect XG PES/PA is a must have for every industrial climber and perfectly suited for working at great heights and in rough terrain.
Per ANSI Z133 Section 8.1.5A all Arborist climbing and work-positioning lanyards shall have a minimum diameter of 0.44 in (11 mm)
Details
- Low elongation
- Good resistance to acids
- Seawater resistance
- Excellent UV protection
- 10.5mm certified with PETZL ASAP (B7, B71AAA, B071AA00), only with ASAP Sorber 20+40 or Absorbica according to EN 353-2
- 10.5mm certified with PETZL ASAP LOCK (B071BAA00) in use with ASAP’SORBER AXESS according to EN 353-2
Diameter: 10.5mm (13/32 inches)
Weight: 78 grams per meter (5.24 lbs per 100 feet)
Elongation at 50 to 150kg: 2%
MBS: 28kN (6290 lbs)
More Information
Ask An Expert
Have a Question?
Our tree care experts are here to help. Contact us for personalized advice and recommendations.
Phone: 920.347.4450
Email: info@arbsession.com
Nice specialty rope
Very light rope that has great slickness. I actually bought this to try as a lanyard, but then found the ansi guidelines for arborists to not recommend anything under 11mm. Seeing that it is a guideline I tried it anyway and it worked well. It is a bit stiffer so tossing was easy. My friction hitches were a bit pickier though. The rope is more suited for mechanical hitches. The sheath and core are apparently sewn together so it will not milk which is nice. An added bonus is that this rope meets the standard needed to be a rope for the treerex 2.0 saddle, so I will be using some excess to replace my worn ones.
