Husqvarna 562XP Mark II Chainsaw

High-performance 60cc chainsaw for professional hardwood forestry

Husqvarna 562 XP® G Mark II is a high-performance 60cc chainsaw, designed for professional hardwood forestry. For use with up to 28-inch guide bar. When you want the power of a large saw in a slim and agile body, this is one of our best petrol chainsaws. Featuring AutoTune 3.0 with Simple Start Technology, this chainsaw always starts easily and runs optimally in all conditions. The high-rev 60cc X-Torq® engine makes felling, limbing and bucking hardwood and large conifers easy.

High cutting capacity

New engine design offers plenty of grunt for peak performance even during longer cuts. The high cutting capacity makes the saw ideal for productive operation – even when using a longer guide bar.

Ability to carry longer bars

The powerful engine in combination with the large bar mount, a sturdy crankcase and sufficient chain oiling provides an ability to carry longer bars.

Slimmed-down design

Low, slender saw body makes the chainsaw easy and convenient to handle in any situation.

Always optimized

Thanks to AutoTune 3.0, the engine settings are always optimized for maximum startability and performance in all conditions, keeping you going no matter the challenges with no need for manual carburetor adjustments.

Powerful and Efficient X-Torq® Engine

The powerful X-Torq® engine dramatically reduces exhaust emissions and also improves fuel efficiency, compared to similar models without X-Torq®

Optimized saw body

No protruding parts, a smooth underside, rounded starter cover and well-protected controls all make the saw easy to handle.

Air Injection filters 98% of incoming dust

The Air Injection™ feature on the chainsaw filters 98% of incoming sawdust, grit and dirt to reduce the amount of air filter cleanings and ensure high performance at all times.

Felling sight to last a lifetime

Having a perfect sight is critical when using a chainsaw – so we made one that’s permanently molded into the chainsaw for long-lasting felling accuracy.

Magnetic filter protects the engine

A magnetic filter inside the fuel hose effectively prevents metal particles from reaching the carburetor and engine, which minimizes wear and interruptions.

Retained bar nuts

A handy retaining function reduces the chance of losing the guide bar nuts.

Low vibrations

Husqvarna’s anti vibration system efficiently separates your hands from the vibrations generated by the engine and the cutting equipment. This is to protect your body but also to reduce the fatigue in your arms and hands and in the end of the day contribute to make your workday more productive.

Quick and easy adjustment

Chain tension should be checked regularily during use. The saw comes with a side-mounted chain tensioner that makes adjustment quick and easy.

Flip-Up Fuel Cap

Easy to open and secures firmly, even when wearing thick gloves

Retained starter screws

A retaining function prevents the accidental loss of the screws holding the starter.

Engine

Power output: 4.7 hp

Cylinder displacement: 3.65 cu.inch

Maximum power speed: 9,600 rpm

Idling speed: 2,800 rpm

Clutch engagement speed (±120): 4,100 rpm

Fuel consumption: 445 g/kWh

Fuel consumption: 3.4 lbs/h

Electrode gap: 0.02 in

Ignition module air gap: 0.01 in

Oil pump type: Adjustable flow

Emission

Exhaust emissions (CO2 EU V): 778 g/kWh

Equipment

Recommended bar length, min: 15 in

Recommended bar length, max: 28 in

Dimensions

Weight (excl. cutting equipment): 13 lbs

Lubricant

Lubricant type (Engine): Husqvarna 2 stroke or equiv. at 50:1

Oil tank volume: 0.7 US pint

Oil tank volume: 0.33 l

Sound and Noise

Sound power level, guaranteed (LWA): 118 dB(A)

Sound power level, measured: 116 dB(A)

Sound pressure level at operators ear: 107 dB(A)

Vibration

Equivalent vibration level (ahv, eq) front handle: 4 m/s²

Equivalent vibration level (ahv, eq) rear handle: 4.5 m/s²